A grapevine wreath with a round sign has a completely different personality from a full deco mesh wreath. The natural vines stay visible, the sign becomes a clear focal point, and a layered bow adds your chosen team colors without covering the entire frame. If you’re making a sports wreath for someone who prefers a cleaner, less bulky design, an 18-inch grapevine base and a 12-inch round metal sign are a practical place to start.
Quick Answer: For an 18-inch grapevine wreath, position a 12-inch round sign on the right side of the frame and attach it securely through its existing mounting holes or approved hanging points. Build a full layered bow on the left, tuck coordinating greenery and flowers around the bow, and leave some grapevine exposed. Check the sign’s level, wreath balance, and hanging stability before displaying.
Why Choose a Grapevine Wreath With a Round Sign?
Grapevine works beautifully when you want the sign and bow to stand out. Unlike deco mesh, which covers a wire wreath frame with volume, grapevine provides its own natural texture. The result can feel casual, tailored, rustic, or sporty depending on your ribbon and accents. You can also change the color palette for football, basketball, baseball, graduation, or other occasions without changing the basic method.
A grapevine wreath also makes good use of a prominent 12-inch sign. Its shape is easy to read, and a side-mounted placement keeps the frame from looking like a circular sign holder with nothing else happening.
Supplies for an 18-Inch Grapevine Wreath
Start with a sturdy 18-inch grapevine base. Then gather a round metal wreath sign, coordinating wired ribbon, and floral picks and sprays. You will also need an appropriate hanging wire or attachment method for the sign, wire cutters, and suitable ties or glue for your decorative stems. Choose accessories compatible with the frame and the sign’s existing holes.
For a balanced sports look, try one bold 2.5-inch ribbon, one smaller coordinating stripe or check, and a quiet solid ribbon. Avoid putting team marks on homemade ribbon accents unless you are using genuine licensed material. The sign can provide the team-specific detail while the rest of the wreath stays color coordinated.
What Size Round Sign Should You Use on a Grapevine Wreath?
An 18-inch grapevine frame paired with a 12-inch round sign is a useful design proportion: the sign is about two-thirds of the frame’s outside diameter. That leaves visible room for a substantial bow and greenery while still making the sign readable. Actual proportions depend on the width of your grapevine frame, the sign’s mounting holes, and how far the bow extends.
Avoid centering the sign just because the wreath is circular. Placing the sign on the right and a layered bow on the left adds asymmetry and creates a more deliberate finished composition. Dry-fit the sign and bow before attaching either permanently.
How to Make a Grapevine Wreath With a Round Sign: Step by Step
1. Prepare and check the grapevine base
Place the grapevine frame on a flat surface and inspect it for weak or broken vines. Rotate the frame until the natural texture looks balanced. Decide which point will be the top when the wreath hangs, and check that your chosen hook or hanger can support the finished weight.
2. Position the sign on the right
Hold the sign against the front of the grapevine frame, rather than leaving it floating across the opening. Angle or position it slightly if that helps the design, but keep any lettering easy to read. The upper and lower points should meet sturdy vines or mounting points. Avoid covering the sign’s artwork with large floral pieces.
3. Attach the round sign securely
Use the sign’s existing holes or manufacturer-approved mounting method. Thread appropriate covered or craft wire through the holes and around solid vines, securing the wire on the back. Use at least two attachment points when possible so the sign cannot spin. Trim wire tails and tuck them where they won’t scratch doors or catch fingers. Do not drill or alter a finished licensed sign just to fit the wreath.
4. Make a generous layered bow
Combine your main team color with a contrasting stripe or pattern. Shape broad loops, place the most eye-catching ribbon on top, and keep the ribbon tails long enough to connect the bow visually to the wreath. Secure the bow’s center tightly with suitable wire and attach it firmly to the left portion of the frame.
5. Add greenery and small accent clusters
Tuck short greenery stems behind and below the bow, then repeat a smaller cluster near the lower-left side if needed. Use a few flowers or decorative picks in your colors rather than burying the entire grapevine frame. Secure stems to sturdy vines; use compatible adhesive or wire where appropriate. If you add ornaments, make sure they are light enough for the base.
6. Finish the sign-to-bow balance
Hang the wreath and view it at eye level. The sign should be readable, the bow should carry your team colors, and at least part of the natural grapevine should remain exposed. Look at the edges of the design and trim only loose ribbon ends, stray wire, or stems that obstruct the sign.
Team-Color Grapevine Wreath Design Ideas
Navy and gold: A bold navy bow with gold and white stripes feels polished and works well with cream flowers and deep green foliage.
Crimson and white: A crimson solid, white stripe, and small floral accents create a high-contrast wreath without needing a lot of extra trim.
Orange and navy: Use saturated orange ribbon as the accent, with navy carrying most of the bow volume. Keep the flowers or foliage neutral so the colors stay clean.
Need help choosing between wreath bases? Compare options in our wreath ideas without deco mesh and wreath bases and shapes guide.
Common Mistakes With Round Signs and Grapevine Wreaths
- Letting the sign hang loosely: two stable mounting points are generally better than one pivot point.
- Covering the sign with the bow: dry-fit both elements before fastening them.
- Adding too much greenery: a grapevine wreath loses its appeal when the frame disappears entirely.
- Using a tiny bow beside a large sign: scale the bow to match the visual weight of a 12-inch sign.
- Leaving rough attachment wire on the back: tuck or cover ends so the wreath can hang without scratching its surface.
Shop Grapevine Wreath Signs, Ribbon, and Accents
Start with round wreath signs and coordinating wired ribbon. Add greenery, picks, and sprays for finishing touches, then visit our Team Wreath Supplies area to shop by your favorite team. Sports Wreath Shop supplies the materials; your arrangement makes the wreath personal.
Grapevine Wreath With a Round Sign: Frequently Asked Questions
Can I use a 12-inch sign on an 18-inch grapevine wreath?
Yes. That is a useful size pairing because the sign stays prominent while leaving room for an oversized bow and exposed grapevine. Check the exact proportions on your actual frame before attaching.
Where should I place a round sign on a grapevine wreath?
For an asymmetrical sports wreath, mounting the sign on the right and the bow on the left creates a balanced arrangement. Other placements can work if the sign stays readable and secure.
How do I attach a metal sign without damaging it?
Use existing mounting holes or manufacturer-approved attachment points. Fasten suitable wire to sturdy grapevine sections and tuck the ends neatly on the back. Avoid drilling new holes into the sign.
Should I cover the whole grapevine wreath with flowers?
Not necessarily. Leaving some vines exposed is part of the appeal. Concentrate greenery and flowers around the bow and use smaller accents elsewhere.
Is a grapevine wreath lighter than a deco mesh wreath?
Not always. Finished weight depends on the base, sign, bow, and attachments. Check the completed wreath and hanger rather than assuming one style is lighter.